Previous

Universal Tube is committed to enhancing its customers’ value with product and services that set industry standards for quality and performance. We relentlessly strive to deliver the best and understand the value of continual improvement – setting goals and objectives throughout the organisation to ensure that we are meeting our customer expectations with our products and services.

UTP is committed to produce round, rectangular & square tubular products to various standards and customer requirements with highest quality & economical cost ensuring all efforts for timely delivery. UTP is also committed to comply with requirements and continually improve its quality management system through innovation as well as up gradation of technology

1) To improve customer satisfaction levels
2) To maximize yield through continual improvement & resource Optimization.
3) To monitor and ensure the on time delivery
4) Training and development of employees at all levels

CERTIFICATES

             
       
             

             
       
             
             
       
             

S. No.
- Characteristics / Type of Check Quantum / Freq of Check Test Procedures / Checks For
1 Visual Inspection 100% Surface defects, Damaged Edges
2 Dimensional Inspection 100% Measuring Tape & Micrometer
3 Mechanical Properties Sample Testing for Verification Universal Testing Machine (60 Ton)
4 Chemical Composition Sample Testing for Verification Spectro

S. No.
- Characteristics / Type of Check Quantum / Freq of Check Test Procedures / Checks For
SLITTING LINE
1 Visual Inspection 100% Tool / Roll marks, Over Lap, Weld Beads, Embossing, Straightness
2 Dimensional Inspection Inspection (Outside Diameter, Thickness, Length)
Hourly Vernier, Micrometer, Measuring Tap
3 3) Metrological Tests (Squareness of the Pipe Ends, Corner Radidus) Hourly Filler / Radius Gauges
4 Mechanical Properties One Sample /Heat/Lot UTM (60 Ton)
5 Chemical Properties Two Sample /Heat/Lot  
6 Technological Tests (Flattening / Drift Expansion Test) Hourly UTM (60 Ton)
7 NDT (Eddy Current) / Hydro Test 100% Leak Tightness as per relevant Std. Hydrostatic Pressure shall be applied as per relevant Std.

S. No.
- Characteristics / Type of Check Quantum / Freq of Check Test Procedures / Checks For
1 Visual Inspection 100% Tool / Roll marks, Over Lap, Weld Beads, Embossing, Straightness
2 Dimensional Inspection Inspection (Outside Diameter, Thickness, Length)
Hourly Vernier, Micrometer, Measuring Tap
3 3) Metrological Tests (Squareness of the Pipe Ends, Corner Radidus) Hourly Filler / Radius Gauges
4 Mechanical Properties One Sample /Heat/Lot UTM (60 Ton)
5 Chemical Properties Two Sample /Heat/Lot  
6 Technological Tests (Flattening / Drift Expansion Test) Hourly UTM (60 Ton)
7 NDT (Eddy Current) / Hydro Test 100% Leak Tightness as per relevant Std. Hydrostatic Pressure shall be applied as per relevant Std.

S. No.
- Characteristics / Type of Check Quantum / Freq of Check Test Procedures / Checks For
PAINTING
1 Visual Inspection 100% Bare Spot, Rough Surface
2 Paint Thickness Hourly With Elco Meter (Thickness in Micron)
 

S. No.
- Characteristics / Type of Check Quantum / Freq of Check Test Procedures / Checks For
FINAL INSPECTION
1 Visual 100% All Defects of Process Control, Marking, Quantity
2 Dimensional At Random Measuring Instruments

FOR CHEMICAL TESTING
Spectro
 
 
FOR MECHANICAL TESTING
Universal Testing Machine
Hardness Tester
Micro Scope
Impact Testing Machine
 
FOR SAMPLE PREPARTION
Polishing Machine, Notch Broaching machine
FOR METROLOGICAL TESTING
Slip, Thickness Gauges, Radius Gauges, Bevel Protector
Profile projector
 
FOR DIMENSIONS
Vernier Calipers
Micrometers
Steel Tapes
 
 

FOR LEAK TIGHTNESS TEST
On line NDT Machines (Eddy Current)
Hydro Static Pressure Testing Machines